’95 nissan pathfinder wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25499
Printed Date: May 15, 2025 at 8:47 AM

Topic: ’95 nissan pathfinder wiring

Posted By: medicmike
Subject: ’95 nissan pathfinder wiring
Date Posted: January 29, 2004 at 4:25 PM

I'm trying to wire in my pioneer deck and i have way more wires than i need under the dash i need to know if the tweets in the vehicle are wired seperately or in with the 6x9 and how i tell where and how to wire in the stock amp. the wiring guide dosent match up to my vehicle that you have on the site help me please

Replies:

Posted By: Alpine Guy
Date Posted: January 29, 2004 at 7:34 PM

why not get a wire harness and save the hassle for the next guy?? And you have a factory amp behind the panel above your pasengers weel whell. You should bypass it.

There wont be speaker wires for tweets in the dash, its just FL, FR, RL, RR, and that goes to the amp then splits up.

Posted By: geepherder
Date Posted: January 29, 2004 at 11:05 PM

Yeah, I always use a harness whenever possible. Stock tweets are 99% of the time just wired in parallel with the mid drivers, only have a cap inline. The colors for wires in a stock amp'd system always seem to be different than non-amp'd. If you've already decided you're going to hardwire, use this link (even if the colors are wrong, you'll still have a pinout): https://www.installdr.com/Harnesses/Nissan-Wiring.pdf

-------------
My ex once told me I have a perfect face for radio.

Posted By: medicmike
Date Posted: January 30, 2004 at 2:15 AM

well i see my problem now i have a 95 pathfinder with a 94 harness in the dash damn nissan cant make anything easy posted_image

why should i bypass the stock amp? is there a problem with it?

by the way thanks for the help

Print Page | Close Window