Glass Wolf or Custom installers
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2573
Printed Date: July 19, 2025 at 7:01 AM
Topic: Glass Wolf or Custom installers
Posted By: Carbotix
Subject: Glass Wolf or Custom installers
Date Posted: August 07, 2002 at 12:32 AM
Take a look at what I've done and let me know what you think. https://members.sounddomain.com/carbotixAny modifications or additional ideas would be apprecaited
Replies:
Posted By: Velocity Motors
Date Posted: August 07, 2002 at 5:24 AM
Nice installation...... I like what you did with the screen in the dash. I wouls have flush mounted the CD player like you did the screen though just to make the lines flow better. The subs and amp look very good too. What kind of subs are they ?? I can't tell from the pics. ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: GlassWolf
Date Posted: August 07, 2002 at 10:16 AM
looks terrific. what'd ya use for the dash with that screen, fiberglass? or did ya just modify the stock dash?
(I haven't looked closely at a newer Ram lately.. I dunno how the stock dash looks.)
I like it.
just for show, you may want to cover that sub/amp board in matching tan vinyl. fairly easy to do and it looks pretty.
that power distro block in the center could be flush mounted like everything else too, so it doesn't stick out so much and protects it more.
niec Indiglo gauges in the dash, too.
-------------
-GlassWolf
Pioneer Stage-4, Orion, DynAudio, Fi
Posted By: GlassWolf
Date Posted: August 07, 2002 at 10:18 AM
by the way, the subs are Precision Power's newer line I believe.
the amps are PPI as well.
-------------
-GlassWolf
Pioneer Stage-4, Orion, DynAudio, Fi
Posted By: J3adSeed
Date Posted: August 07, 2002 at 1:32 PM
i do like the idea of vinyl instead of carpet. and maybe putting the dist. block flush, or under plexi or something.
Posted By: Carbotix
Date Posted: August 19, 2002 at 10:19 PM
Thanks guys for the input! Now that I look at it....your right. It just doesn't look right. Back to the drawing board. I don't have enough air space in the sub enclosures so they bottom out. I'm going to try some poly-fil and if thay doesn't work their getten yanked too. I tried fiberglass on the dash and it didn't stick so I ended up using plexy. I should have flushed the screen without the trim don't ya think? I think that I will try a mold for the dash next, give it some personality by buldging the screen out just a little but completly flush and same with the deck. What do you think? The subs are PPI as well as the amps. w/ a .5 cap. I used sound sheild on the floor (cheaper) and dinomat in the doors. I put MB Quart 6.5" comp. sets in the front doors and 5.1/4"s in the rear doors. My highs and mids are extreamly crisp but my mid to lows and deep lows just are'nt there, I had to keep the sub amps. truned all the way down cause it sounds like SH*T. I really need your help on this one.
Posted By: TheRapture
Date Posted: August 20, 2002 at 10:31 AM
sweet install man.... thats all i can say :)
|