Print Page | Close Window

Alpine head unit cant hold memory!

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26088
Printed Date: November 02, 2025 at 4:14 AM


Topic: Alpine head unit cant hold memory!

Posted By: stampzinger
Subject: Alpine head unit cant hold memory!
Date Posted: February 08, 2004 at 8:34 PM

I just installed my Alpine 7892 in my truck, i wired it all correct(I think) and when i turn the truck off, the cd player looses its time and my preset settings.Could you guys help me please



Replies:

Posted By: mobiletoys2002
Date Posted: February 08, 2004 at 8:37 PM
the yellow wire is not connected to a constant source of voltage you need it to always have voltage.




Posted By: mobiletoys2002
Date Posted: February 08, 2004 at 8:38 PM
check and make sure your red wire only has voltage on it when the accesory position is on and loses it when car turns off and make sure your yellow wire always has voltage (maybe you got them switched)




Posted By: stampzinger
Date Posted: February 08, 2004 at 8:49 PM

IM pretty sure i tryed them both, i'll get out the tester tomarrow and see which wire gets power with the truck off. thanks






Print Page | Close Window