wiring harness
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26115
Printed Date: May 14, 2025 at 1:56 AM
Topic: wiring harness
Posted By: N00l3
Subject: wiring harness
Date Posted: February 09, 2004 at 7:03 AM
Hey im new to these forums and this is my first time ever installing a radio in a car but i was wondering if wire caps are a "good" alternative to soldering the wires? i can do either but i really dont want to solder the wires together. also this is kind of off topic to the post but if i have 2 speakers in the back of my car that are 4 ohms and 2 up front that are 3.2 ohms will that damage anything? my reciever is rated for 45wattsx4 at 4 ohms. thanks for any help
Replies:
Posted By: DYohn
Date Posted: February 09, 2004 at 8:22 AM
By wire caps do you mean standard house wiring twist-on wire nuts? These are not a good idea in a car as they can vibrate loose. Use crimp-on connectors or solder. I believe the anser to your speaker question is no, it won't hurt anything.
|