splitting speaker signal?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26295
Printed Date: November 04, 2025 at 7:05 AM

Topic: splitting speaker signal?

Posted By: jaymes
Subject: splitting speaker signal?
Date Posted: February 11, 2004 at 4:44 PM

hello i am installing 2 10 " subs in my dads montana (van) i have some questions.

My amp has hi level inputs, so can i take the wire from the rear speaker and send the + - to the amp AND the rear speaker?? My dad wants to keep the factory headunit because he likes the steering wheel controls so a new unit is no option.

any suggestions??

Replies:

Posted By: DYohn
Date Posted: February 11, 2004 at 5:38 PM

Yes, you can connect the high-level inputs to the rear speakers and keep the rear speakers connected. No problem.

Posted By: mobiletoys2002
Date Posted: February 11, 2004 at 5:51 PM

what kind of car do you have?? Pac makes sterring wheel control interface's for a lot of vehicles!!!

Posted By: jaymes
Date Posted: February 11, 2004 at 10:24 PM

so just connect the + and - from rear factory the speakers to the amp to get the signal? it seems quite easy.

Posted By: shadowrelic
Date Posted: February 12, 2004 at 7:11 AM

yeah thats all you need to do :D most amps need wires from BOTH rear speakers though....

and there are probubly alot of head units with stearing wheel control....

-------------
2 subs
1 amp
0 knowledge of how to hook them up to my car.

Print Page | Close Window