Ford deck removal

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26383
Printed Date: May 14, 2024 at 7:26 PM

Topic: Ford deck removal

Posted By: Thack79
Subject: Ford deck removal
Date Posted: February 13, 2004 at 6:38 AM

Hey guys:

Is the only way to remove a ford deck is with a special tool or is there some other way (95 Mustang)??

Replies:

Posted By: thepencil
Date Posted: February 13, 2004 at 9:39 AM

Any coathanger or steel wire that will fit into the four hole of the headunit will do. However, with the stereo removal tool you are done with removing the headunit out in two minutes. The tool will cost you no more than $10. Why do it the hard way? Time, after all is money.
Here is a link that will show you how.

tool

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: Ketel22
Date Posted: February 13, 2004 at 11:17 AM

i believe the tool costs like$4 at walmart.

-------------
Quad L Handyman services

Posted By: HeathMac
Date Posted: February 13, 2004 at 3:10 PM

if thare is a blauplunket dealor in your area ask them for a set of deck keys thay use the same keys as the factory ford and thay might just give them to you

Posted By: Thack79
Date Posted: February 14, 2004 at 8:49 AM

thanks guys!!

Posted By: spl_enterprise
Date Posted: February 14, 2004 at 11:20 PM

bend a coat hanger with a pair of pliers. damn you guys would buy snow if you were eskimos. save your 4 bucks for a 40 oz. or a couple 22's.

-------------
Pete - SPL Enterprise Inc.

Posted By: Teamrf
Date Posted: February 15, 2004 at 1:16 AM

At least with the keys you are sure not to spring the radio where you have to take apart the dash to get to it.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Posted By: fatdaddyjoe
Date Posted: February 15, 2004 at 3:25 AM

I HAVE USED 4/ 6 PENNY NAILS TO PULL OUT FORD STOCK RADIOS AND IT WORKS WELL AND EASY.....

-------------
THE LOUDER THE BETTER !!!!!!
CAN YOU FEEL IT ?????

Posted By: mecpcert_1
Date Posted: February 15, 2004 at 3:59 AM

go to wal-mart or murray's, only $4.

use the right tool for the job, it just makes it a @#$% of alot easier! posted_image

-------------
do it right the first time....less warranty work=more money!:)

Posted By: jeffchilcott
Date Posted: February 15, 2004 at 2:40 PM

yep walmart has them, or i will even let idiots come into the shop and i will pull a radio for them for $5 so hush hush, if they knew they could get the groove tool i have for $4 they would be pissed

-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place