Print Page | Close Window

Lanzar Opti 6200 Help

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26535
Printed Date: May 14, 2025 at 7:32 PM


Topic: Lanzar Opti 6200 Help

Posted By: SeaWeasel
Subject: Lanzar Opti 6200 Help
Date Posted: February 15, 2004 at 4:45 PM

I have a "new" Lanzar 6200 Optidrive rated at 33.3W RMS x 6 at 12 volts.  Apparently, you can set this amp up about a million ways.  I intend to use it to power multiple 6.5's and, hopefully, a pair of subs in a boat application.  Does anyone have any experience with this unit?  I am confused by the jumpers and the manner in which I can safely run it.  Any help appreciated.

-------------
How do you Voodoo?



Replies:

Posted By: Teamrf
Date Posted: February 16, 2004 at 1:19 AM

Well if you have a six channel amp-hook all the speakers up to each channel.



-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.



Posted By: stratusfear69
Date Posted: February 16, 2004 at 1:52 AM

Teamrf...good answer, did you read what you wrote?  "...ALL the speakers to each channel".  I can see why your nickname is The Rookie.  Anyways....

SEAWEASEL,  I checked Lanzars website, but the only 6 channel amps they show are the VIBE635 and VPRO6300, so i'm not sure if your's is older?  I'd give them a call and see if they could help you out...

https://www.lanzar.com/contacts.htm

Good luck...stratusfear69


Print Page | Close Window