Print Page | Close Window

RF HE2 question

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26558
Printed Date: May 14, 2025 at 10:24 AM


Topic: RF HE2 question

Posted By: walty220
Subject: RF HE2 question
Date Posted: February 15, 2004 at 11:08 PM

Just installed my he2... how long do i let it break in and how do i let it get broken in??

-------------
1983 Oldsmobile Hurst/Olds
--------------
Pioneer Premier DEH-P360
KICKER K35 & K410 Speakers
KICKER KX150.4 Amplifier
Rockford Fosgate PUNCH 1200W Amplifier
Rockford Fosgate PUNCH 800W 12" HE2



Replies:

Posted By: thapimpfromchi
Date Posted: February 15, 2004 at 11:13 PM
just play songs with bass, at a kinda low volume. Not too low, i mean, at a decent listening volume, but try not to SLAM for a few days. You basically gotta get it used to the movements. once its set, u can blast that puppy all you want.

-------------
1990 Honda Civic HB:
Clarion DXZ545MP H.U.
2- 6.5" Power Acoustik interiors
Diamond Audio 600.1 amp
Diamond Audio 15" M6MKII
Pyramid PB881X 4 CH. Amp



Posted By: Teamrf
Date Posted: February 16, 2004 at 1:10 AM

You should play that sub at half way for 2 hours to break it in. It should tell you that when you open up the sub box.



-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.



Posted By: customsuburb
Date Posted: February 16, 2004 at 11:43 AM

Most subs like to be broken in by playing them at low volume for 24 hours at least(it dosnt have to be 24 hours straight). Just try not to crank it up before its broken in.


Print Page | Close Window