Print Page | Close Window

Pioneer Deck and a popping sound.

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27081
Printed Date: June 24, 2025 at 2:21 AM


Topic: Pioneer Deck and a popping sound.

Posted By: Tight_dbz
Subject: Pioneer Deck and a popping sound.
Date Posted: February 23, 2004 at 9:12 PM

I own a Pioneer DEH-6400.  Everytime I lower the volume all the way down to 0 it generates a "pop" on the Left Rear channel both on the hi level and lo level outputs.  This also happens when i switch sources and use the Easy EQ button.  It is only one pop per button press not a constant popping.  It is very annoying and you can imagine what a simple pop sounds like when its run through 1200 watts of power.  I tested everything.  The patch cables, power connections etc.  and nothing.  My co-worker suggested it might be the internal power supply.  Are there any other suggestions?  Thanks in advance.



Replies:

Posted By: kgerry
Date Posted: February 24, 2004 at 3:58 PM
i would suspect an open ground on the audio path in the unit for that channel

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979





Print Page | Close Window