Print Page | Close Window

Crossover settings?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27119
Printed Date: March 30, 2026 at 9:06 PM


Topic: Crossover settings?

Posted By: Paradigm
Subject: Crossover settings?
Date Posted: February 24, 2004 at 11:05 AM

If I have two sets of speakers, one with a 70-20000Hz range, the other with 90-20000Hz range, and am going to use these with a sub, what should I set the crossover points to to achieve good balanced sound without losing anything? 80 Hz? I was planning on setting the hi-pass to 12db slopes, and the low-pass to 24db. Sound good or not?

-------------
VEHICLE: 2002 GMC Sonoma ZR2
Alpine CDA-7940
AudioControl EQT x2
JL Audio 1000/1
JL Audio 10W6 (originals) x3
Kicker ZR120
Kicker ZR460
Polk GXR-6 x4
Polk GXR-4 x2



Replies:

Posted By: customsuburb
Date Posted: February 24, 2004 at 4:51 PM

probobly 90 hz. You don't have to set it to this setting. Listen to some familiar music and set it where you like.



-------------


Print Page | Close Window