subwoofer to rear channels of 6600

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27125
Printed Date: June 26, 2025 at 1:40 PM

Topic: subwoofer to rear channels of 6600

Posted By: rbbrink
Subject: subwoofer to rear channels of 6600
Date Posted: February 24, 2004 at 12:42 PM

hooking up subwoofers to rear speaker output on pioneer 6600--does it really work well?

Replies:

Posted By: Ravendarat
Date Posted: February 24, 2004 at 3:06 PM

I have tried using the rear spk leads on the pioneer 4300 to run a sub. It wasn't bad but not great. The main advice I have is use a single dual voice coil sub. Probally an efficent 10'. Also use a ported box because it will increase your system efficency if its built right.

Posted By: customsuburb
Date Posted: February 24, 2004 at 4:42 PM

no. 16 or less watts rms isn't going to give you any bass. You will be much happier with an external amp. maybe you cuold run 6" midranges but not some 10" subs, not even in a ported enclosure.

-------------

Print Page | Close Window