routing of wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27674
Printed Date: November 22, 2025 at 5:55 AM

Topic: routing of wiring

Posted By: djbeny
Subject: routing of wiring
Date Posted: March 03, 2004 at 5:30 PM

I am looking for some opinions on the best, cleanest way to run the wires for two amps. do I run the RCA's next to the 12V supply or is it best to keep things well isolated from one another to avoid " Dirty sound".

little help, cheers

Replies:

Posted By: DYohn
Date Posted: March 03, 2004 at 5:44 PM

It's best to keep the RCA's and the power cables seperated as much as possible.

Posted By: wvsquirrel
Date Posted: March 03, 2004 at 6:15 PM

I agree 100% with DYohn. It's always best to seperate your power and signal wires as much as possible. Some RCA's are better than others (shielding wise) and have less interfeerence if they're run close to power wires, but why risk it! Follow the rule of thumb above and you'll do fine.

-------------
Squirrel
"No more Cpt. Kirk chit chat"
If its too loud, then you're too old
Donate to the12volt.com

Print Page | Close Window