is it important to use same brand?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27811
Printed Date: July 17, 2025 at 4:03 AM
Topic: is it important to use same brand?
Posted By: netboy
Subject: is it important to use same brand?
Date Posted: March 06, 2004 at 2:23 AM
Is it important to use the same brand or type of speaker within the system? Specifically....I have memphis Mclass 6x9 in the rear deck and Mclass 6.5" 2-way speakers in the door. I just got some q-form kick panels and am thinking of getting mbquart or JL audio seperates. Should I just go with the memphis speakers so it matches my entire system? My subs are 2 12" Memphis M3 subs, but I didnt think that it mattered since all they do is go BOOM. And everything powered by the memphis belle, the big one. Thanks
-------------
Memphis MC-1300
2 12" JLw6v2
Diamond audio M3 6x9
Diamond audio M3 5.25 components
Audio control Matrix
Carputer
Replies:
Posted By: DYohn
Date Posted: March 06, 2004 at 9:52 AM
Are you planning on replacing your front channel speakers or adding a second set?
Posted By: netboy
Date Posted: March 06, 2004 at 2:24 PM
adding the second set, so a set in the factory door hole, and a set in the new kick panel
-------------
Memphis MC-1300
2 12" JLw6v2
Diamond audio M3 6x9
Diamond audio M3 5.25 components
Audio control Matrix
Carputer
Posted By: DYohn
Date Posted: March 06, 2004 at 2:37 PM
Not sure what you'll gain by that, but in that case you should match the sets (in my opinion.)
Posted By: 93accordSE
Date Posted: March 06, 2004 at 2:47 PM
I would match them, it would just make the system go together as Brand name stuff, it wouldn't really matter if you used JL Audio or any other brands, it just wouldn't be the main brand name.
-------------
|