Print Page | Close Window

audiobahn aw1251t’s and pyrimid PB545

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28005
Printed Date: November 26, 2025 at 2:12 AM


Topic: audiobahn aw1251t’s and pyrimid PB545

Posted By: DRAVEN
Subject: audiobahn aw1251t’s and pyrimid PB545
Date Posted: March 08, 2004 at 6:44 PM

anyone know how i should wire my subs and amp? Should i bridge it and if so how should i run with the dvc's?

Thanx guys. (and gals)




Replies:

Posted By: jnrnavarro
Date Posted: March 08, 2004 at 10:32 PM
i made the error of using that woofer with my audiobahn a1200dq, i ran them for about two weeks before i fried the voice coils. be careful of your out put,you can run the pair @1ohm on 1 channel or 2ohm on two channels. if i did it again i would not go up to the speaker rating. i have moved on to a pair of audiobahn alum12. subs and havent had a problem. note: the 1251t is a "natural sound woofer" i didnt use the word sub because it was so easy to overpower the pair at a half gain setting. be careful,goodluck. you may be happier with a step up or two in models if you are looking to produce deep hard bass.


Print Page | Close Window