Anyone know where I can pick up a prefab'd 12" w7 enclosure that will fit into a mustang's trunk? I want to put in a slot-vented enclosure, I am already planning on giving up my spare (this is my toy car not my commuter). I plan on building the system around the box, but I can't find anything. Anyone have any idea's? I really don't want to build my own, I would put together an unassembled on though. Just don't want to mess with measurments and calculations, and I don't know how to tune it to 38hz either.
I don't know of any prefabbed ported enclosures specifically for the w7 but here one's that is sealed.
https://https://www.subzoneusa.com/jl_audiow7.htm-------------
This should work for your specific application, you just need to check the measurements:
https://www.subzoneusa.com/zv_series.htm. The single ported
ZV-121 is what you would be looking at, it's within JL's recommended specs. Personally I would build the box myself, JL includes a nice data sheet with schematics for a box with the woofer. I used the one that came with my 12w6v2 and got very nice results, building an enclosure is not hard if you just take your time and read up a little. The JL spec sheet even tells you what lengths to cut the wood and how many pieces you need, it doesn't get any easier than that! You'll also save a ton of money if you do it yourself.
-------------
that would be nice but the mounting hole for a 12" w7 is only 10.5"
I think I want to get the box that is on the data sheet for the w7. I'll have to find some one to build it somehow.
Has any ever got a box that is 15.5" tall into a mustang, I know I have to remove the back seat, but what is the max height anyone got into the trunk? It's a 2003 mustang.
y not fiberglass the whole trunk????? it would be easier... well calculation wise and it would use all the avaliable airspace