03 explorer steering wheel

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28273
Printed Date: July 28, 2025 at 11:37 AM

Topic: 03 explorer steering wheel

Posted By: 03Limited
Subject: 03 explorer steering wheel
Date Posted: March 12, 2004 at 6:36 PM

I was wondering if someone could post the wiring colors for the stereo steering wheel controls, I just installed a new headunit and miss my controls:( I purchased the Pacs controller and am hoping to splice in at the radios wire harness. Any help would be greatly appreciated

Replies:

Posted By: Alpine Guy
Date Posted: March 12, 2004 at 9:47 PM

how does this pacs controller send the signals to your new deck after recieving the signal from the steering wheel???

Posted By: lagatbezan
Date Posted: March 12, 2004 at 11:39 PM

the way it works is that it has a little transmitter that sends a signal to the aftermarket headunit. But the new headunit must have a wireless remote capability.

As far as hooking it up, here is a link to the installation instruction for the prepheral steering wheel module. take a look at it, it might help! it lists up to 2002. u'll need adobe to open it!

https://peripheralelectronics.com/periph_products/cd_changer_autos/instructions/peswix%20inst%209-23-02.pdf

Posted By: Metra Tech
Date Posted: March 14, 2004 at 9:54 AM

It's just one wire you hook up and it should be in the installation instructions. If not give PAC a call.

Posted By: 03Limited
Date Posted: March 14, 2004 at 10:06 AM

Thx for the info guys going to try installing it today.

Print Page | Close Window