Fiber glassing, Dynamat
Printed From: the12volt.comForum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28537
Printed Date: July 31, 2025 at 4:55 PM
Topic: Fiber glassing, Dynamat
Posted By: 93ser
Subject: Fiber glassing, Dynamat
Date Posted: March 17, 2004 at 3:54 AM
I've started my custom stealth box for a ed10Kx, and now I'm working on enclosing the box with fiberglass. However, I cant decide if I should remove the dynamat or just fiberglass over it (see pics). I don't even know if the epoxy resin will bond, I might have to test a sample. Also I can see by removing the dynomat and fiber glassing directly to the body would make the box more rigid, but at the sometime might create more rattles. On the other hand, if there was dynamat isolating the box, then maybe the vibrations of the box will be absorbed rather than the car panels. Please, anyone with experience help me decide.
Thanks again,
Travis
Thanks again,
Travis
Replies:
Posted By: 93ser
Date Posted: March 17, 2004 at 3:58 AM
Posted By: Teamrf
Date Posted: March 17, 2004 at 10:46 AM
Well that resin is going to have to be "soaked" up by some type of material. You can use fiberglass cloth, or an old Circuit City shirt works great!
-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.
-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.