wiring speakers, 1 ohm load

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28539
Printed Date: June 16, 2024 at 9:07 PM

Topic: wiring speakers, 1 ohm load

Posted By: danielc22
Subject: wiring speakers, 1 ohm load
Date Posted: March 17, 2004 at 5:14 AM

how do i get a 1 ohm load with 1 2 or 3 subs

Replies:

Posted By: fredisfound
Date Posted: March 17, 2004 at 7:47 AM

that would depend on the subs and the way you hook them up, what ohms are they rated at , are they single or duel voice coil ?

Posted By: superstreet786
Date Posted: March 31, 2004 at 3:19 PM

fredisfound is right on the dot on that one

-------------
---- 1996 Chevy S10 ----
1 Lightning Audio S2.600.2 Amp
2 Lightning Audio 12" Subs
1 Lightning Audio 1 Farad Cap

Posted By: Clean Install
Date Posted: March 31, 2004 at 7:37 PM

yes just a bit more info then we can help.... posted_image

-------------
If we learn from each success and
each failure, then we can improve ourselves

Print Page | Close Window