Print Page | Close Window

rockford bassLink remote installation

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28543
Printed Date: July 19, 2025 at 8:27 PM


Topic: rockford bassLink remote installation

Posted By: DaLynQwenT
Subject: rockford bassLink remote installation
Date Posted: March 17, 2004 at 7:55 AM

Hey, does anyone know where a good place to hook the Rockford Bass remote at in the car?? I want easy access to it, but if in the car isn't good, is the trunk good? Thanks.

Its a 1998 Chevy Malibu if you need to know.



Replies:

Posted By: tee17
Date Posted: March 17, 2004 at 7:59 AM

i have one in my lumina. i put mine right under the dash where all i have to do is reach my arm out and tuem it up or down as needed




Posted By: Custom_Jim
Date Posted: March 17, 2004 at 9:09 AM

You can take the controller apart and then drill about a 1/4" hole in a surface and mount it to where only the knob is showing but you do need some clearance behind the panel for the circuit board and cable connection. Mounting it without the housing to me looks cleaner and gives you more mounting possibilities.

Jim



-------------
1968 Chevy II Nova Garage Find 2012
1973 Nova Custom
1974 Spirit of America Nova
1973 Nova Pro-Street



Posted By: DaLynQwenT
Date Posted: March 17, 2004 at 9:27 AM
Thanks a lot guys, so in the car is good.   I appreciate the help guys.



Posted By: mobile1
Date Posted: March 17, 2004 at 10:14 PM
to go along with custom jim, you can actually cut the circuit board down if need be. BE CAREFULL. don't cut any of the circuit paths. By doing this you can make it half the size.



Posted By: flatulatta
Date Posted: March 18, 2004 at 9:54 AM
i would hide it somewhere to make it clean



Posted By: Krazzyborri
Date Posted: March 18, 2004 at 11:29 AM

Yeah you need it in the car!! You are gonna have to adjust for different cd's and also the tuner. Go with the custom and just let the knob stick out.


Print Page | Close Window