Clarion DPX1000.1 trouble

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28567
Printed Date: July 13, 2025 at 8:50 PM

Topic: Clarion DPX1000.1 trouble

Posted By: ballajim
Subject: Clarion DPX1000.1 trouble
Date Posted: March 17, 2004 at 5:41 PM

My clarion dpx1000.1 power light is blinking when i turn on the amp instead of powering up. Is this some sort of protection circuitry?

any advice?

Replies:

Posted By: DYohn
Date Posted: March 17, 2004 at 6:35 PM

Clarion amps will shut down on too low system voltage, less than 2 ohms speaker load, or an open speaker connection. A blinking green light MIGHT be the protection indication for this amp, I've never tested it to be sure. Check your speaker connections, make sure you haven't blown a speaker, and test your system voltage.

Print Page | Close Window