Print Page | Close Window

amps

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28608
Printed Date: April 29, 2024 at 10:11 PM


Topic: amps

Posted By: southside
Subject: amps
Date Posted: March 18, 2004 at 2:40 PM

 i need a good amp, that will power 4 12 in cerwin vega v- max subs.dvc 800w  max power. i have boughten sony amps for so long that i got no idea anymore. so suggestions would help thanks.

-------------
southsider



Replies:

Posted By: southside
Date Posted: March 18, 2004 at 2:41 PM
 also i want it to be a mono amp too.

-------------
southsider




Posted By: AudioBAHNvlcm
Date Posted: March 18, 2004 at 2:54 PM
you wanna a mono amp to power 4 12"s?




Posted By: forbidden
Date Posted: March 18, 2004 at 2:59 PM
A Rockford 1501BD would be a good amp for this application. 1500 w x 1 rms @ 2ohm mono, the exact load that 4 dvc 4 ohm subs wired in a series / parallel circuit will present.

-------------
Top Secret, I can tell you but then my wife will kill me.




Posted By: southside
Date Posted: March 18, 2004 at 3:00 PM
or at least something that make my sh*t go boom. so any suggestions would be helpful.

-------------
southsider




Posted By: forbidden
Date Posted: March 18, 2004 at 3:11 PM
The box is what will make the bite, not just the amp.

-------------
Top Secret, I can tell you but then my wife will kill me.




Posted By: southside
Date Posted: March 18, 2004 at 3:15 PM
so that rockford bd if i run those subs in paralell will break that ohm load down to two?

-------------
southsider




Posted By: southside
Date Posted: March 18, 2004 at 3:16 PM
so i will need one or two of those amps forbidden? an thank u for your advice i really appreciate it.

-------------
southsider




Posted By: southside
Date Posted: March 18, 2004 at 3:19 PM
would this amp work becauseROCKFORD FOSGATE
2000 WATT RMS SUBWOOFER AMPLIFIER

i think there switching over to these now

-------------
southsider




Posted By: forbidden
Date Posted: March 18, 2004 at 3:27 PM
Link won't post for me. Anyways, your subs if they are dual 4 ohm voice coils can each be wired in series to create a single 8 ohm load for each sub. Then all 4 subs wired in parallel create a 2 ohm mono load. Rockford amps 99% of the time make more power than they claim, I would expect this amp to produce closer to 1700 watts rms @ 2 ohm mono (the 1501bd that is). If the link you posted is for the T20001bd then that amp will work just fine as well.

-------------
Top Secret, I can tell you but then my wife will kill me.




Posted By: southside
Date Posted: March 18, 2004 at 3:37 PM
thank u forbidden i apperciate it very much.

-------------
southsider




Posted By: southside
Date Posted: March 20, 2004 at 6:53 PM
so the  bd15001 rock amp will make my 4 dvc 4ohm cerwin vega amp will be better than lets say two sony 1600w mono amps?

-------------
southsider




Posted By: forbidden
Date Posted: March 20, 2004 at 7:13 PM
That bd1501 will work way better than two Sony's with hired models to try and make them look good.

-------------
Top Secret, I can tell you but then my wife will kill me.





Print Page | Close Window