Pyle Amps

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28620
Printed Date: May 21, 2024 at 7:30 AM

Topic: Pyle Amps

Posted By: Bonnevillebazz
Subject: Pyle Amps
Date Posted: March 18, 2004 at 5:29 PM

Putting a starter set in a 96 Bonneville SSEi. Looking at 2 Coustic Dual Voice 12s and a Pyle 1600W Red Elite amp. I can't seem to find any real info about the Pyle amps and I hoped I could get some help here.

Thanks any Replies are greatly appreciated

Replies:

Posted By: DYohn
Date Posted: March 18, 2004 at 8:02 PM

I can't recomend Pyle amps. PILE is more like it. How much are you planning to spend?

Posted By: forbidden
Date Posted: March 18, 2004 at 8:04 PM

I could have posted something about dung for example but will leave it as please reconsider your options.

-------------
Top Secret, I can tell you but then my wife will kill me.

Posted By: bfog99
Date Posted: March 18, 2004 at 8:12 PM

I would try to find another amp. however, a link to the user manual for that amp is :

https://209.125.209.59/PDF//ELITEAMP.pdf

it is model number PLA2480.

Posted By: FullForce
Date Posted: March 18, 2004 at 8:29 PM

Bonnevillebazz wrote:

Putting a starter set in a 96 Bonneville SSEi. Looking at 2 Coustic Dual Voice 12s and a Pyle 1600W Red Elite amp. I can't seem to find any real info about the Pyle amps and I hoped I could get some help here.

Thanks any Replies are greatly appreciated

hey dude, email me at fullforce@charter.net i think i have something here you would find interesting

Posted By: Bonnevillebazz
Date Posted: March 18, 2004 at 11:28 PM

I was thinking that I coulnd't get an amp under $300 with that much wattage. So I could go with the pyle and push the subs. I could always sell it after a few months and upgrade but if the pyle really can't push my subs then i'll look smaller with more quality.

Posted By: bfog99
Date Posted: March 18, 2004 at 11:44 PM

i would look into the JBL BP600.1. It is 1 ohm stable so you could wire your subs in parallel for a 1 ohm load and push 600 watts RMS (300 per sub). I know the specs for the pyle amp say that it can push 180 x 2 @ 2 ohm, but with the quality of that amp I would HIGHLY doubt it. you can get the jbl amp for about 200 + shipping.