Memphis Mojo

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28697
Printed Date: May 01, 2024 at 11:00 AM

Topic: Memphis Mojo

Posted By: AudioBAHNvlcm
Subject: Memphis Mojo
Date Posted: March 19, 2004 at 9:10 PM

i just bought the memphis mojo amp (2000D), and i need to know where to set all of the dials so that i get the best performance. also do i run each sub off its own channel or should i bridge the 2 channels to 1? i have 2 memphis mojo 15"s, and they are dual 2 ohm.

posted_image

Replies:

Posted By: AudioBAHNvlcm
Date Posted: March 19, 2004 at 9:13 PM

here is what is on the side of the amp:

Level
Min-Max

LPF
30Hz-230Hz

QFC
0.5-1.2

Subsonic On/Off
10hz-30hz

Posted By: netboy
Date Posted: March 19, 2004 at 10:59 PM

I would set up the LPF to 75-80hz, and switch the sub sonic filter to on since nothing is really recorded below 30hz and that way you amp doesnt use unneccisary power. as for teh QFC no idea what that is. Are you looking for SQ or SPL, because the mojo's just get freakin loud. Mojo's aren't really built for SQ.

-------------
Memphis MC-1300
2 12" JLw6v2
Diamond audio M3 6x9
Diamond audio M3 5.25 components
Audio control Matrix
Carputer

Posted By: AudioBAHNvlcm
Date Posted: March 19, 2004 at 11:19 PM

yah the mojo is the spl woofer. i just came inside from installing the amp and Oh...My...God! it is soo loud, it makes me feel like my ears are gonna bleed. but it is a cool mit. yep thats right....Mit!

Print Page | Close Window