AMP : ROCKFORD-FOSGATE-POWER-501bd (Running 2x12" Subs)
300W x 1 @ 4 Ohms RMS
550W - 600W x 1 @ 2 Ohms RMS
Bridgeable
Crossover : LP 50-250Hz 24dB per Octave
Subsonic filter
Bass Control - 0 to 18 dB @ 45 Hz
Low level RCA Signal input. Voltage - 100mV - 6 volts
4 gauge Power Wire input
Cast Heatsink
Wired Bass Control included
Protection built-in
Frequency response : 20 to 250 Hz +/- .5 dB
Dimensions : 2.38 X 9.85 X 13.07 (inches)
SUB : 2 x 12" ROCKFORD-FOSGATE-RFP4112
12" Punch 'HE2' DVC series subwoofer
400W RMS power handling
800W Peak power handling
Dual 2-ohm voice coils
85.0 dB SPL (dB @ 1w/1m)
Magnet Weight: 77.4 oz (2194g)
Frequency range: 27Hz-250Hz
Mounting diameter: 11.00 inches
Mounting depth: 6.0 inches
I have them wired up as follows

But that means i still have a Positive and Negative on each Sub not connected to anything, as they are dual coil subs...
Any Help Much Appreciated..:^:
first off it wouldnt be a good idea to turn on your system too much if you havent already, having only one vc of a dvc sub is not good for the sub.
This is how you should have you subs wired.

Also I hope you have your power wire and ground wire run to the amp and fuse correctly
-------------
Quad L Handyman services
would this make it more powerfull now???
i wont be turning my system on and yes everything is wired up nicely, cheers for your help m8
wiring it that way, is the correct way, using only one of the two voice coils on your subs with damage the subs. But yes this should effectively give you a 3db increase (aka double your sound)
-------------
Quad L Handyman services
cheers buddy, yeah i gathered its wrong way just wanted to know if its gonna be louder as i am well pleased with it already...