AMP GAIN SETTINGS
Printed From: the12volt.comForum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2902
Printed Date: July 12, 2025 at 10:43 AM
Topic: AMP GAIN SETTINGS
Posted By: SKI76
Subject: AMP GAIN SETTINGS
Date Posted: August 19, 2002 at 9:50 AM
I have a US Acoustics 800D subwoofer amp driving two MTX 10" subs at 4 Ohm. The input level settings on the amp range from 100mv to 6v. My Clarion head unit is supposed to put out a 4V signal. I am having a bit of trouble getting the amp input set correctly. No matter where I set the gain on the amp I cannot hear any difference in output. This particular amp has a remote bass level controller and the head unit also has a subwoofer colume control, if this matters.
Any advice would be greatly appreciated.
Thanks
Steve...
Replies:
Posted By: JellyNutz
Date Posted: August 20, 2002 at 8:53 PM