MB Quart cross-over
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29201
Printed Date: May 27, 2024 at 8:43 PM
Topic: MB Quart cross-over
Posted By: BaddestBanshee
Subject: MB Quart cross-over
Date Posted: March 28, 2004 at 7:37 PM
We have MB Quart component 6 inch woofers and 1" tweeters. They came with the mb quart qxd-216 crossover. This thing has 12 connections on it. I have all the inputs and outputs hooked up right. Where do I put the bridge on tweeter A B C D to filter the tweeters correctly?
-------------
Want to know about Audi, I thought you did.
Replies:
Posted By: BaddestBanshee
Date Posted: March 28, 2004 at 11:28 PM
Hello!
-------------
Want to know about Audi, I thought you did.
Posted By: DYohn
Date Posted: March 29, 2004 at 10:24 AM
There are several terminals for the tweeter because the crossover has 0db, -3db and -6db attenuation circuits. These settings will cut the tweeter signal so you can match it to the response of the woofer depending on your installation. Use the position that gives you the best blend.
|