kicker resolution tweeters

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29238
Printed Date: May 15, 2025 at 10:28 PM

Topic: kicker resolution tweeters

Posted By: 80085
Subject: kicker resolution tweeters
Date Posted: March 29, 2004 at 9:34 AM

i have the kicker resolution rs6 component set. it comes with the r6c midrange and r25 tweeter (as seen here https://www.kicker.com/ShowPage.cfm?filename=kickres.html&menu=MIDTWEET). my problem is, the 1-inch r25 tweeter doesn't fit in my existing factory tweeter location. i really don't want to make a new hole for the tweeter, and i like where the factory spot is. so, if i buy the r19 tweeter (.75 inch), and use that in my component set, will that still be okay? or does it mess up the whole matched component setup?

by the way, i'm also using the rockford 201s to power these components.

Replies:

Posted By: stevdart
Date Posted: March 29, 2004 at 1:45 PM

It looks like the rs6 crossover is at 3.5K. The r19 tweeter has a range starting at 4.5K. The 1" tweeter you want to replace is the r25? It has a 3.5K and up freq response.

So, no, it doesn't look like you can make this switch.

Posted By: DYohn
Date Posted: March 29, 2004 at 2:08 PM

... unless you also swap out the crossover. Build a 2-way passive Xover at about 5KHz, which should do nicely.