I need help on how to remove the factory radio in the 2004 Frontier. I knew how to remove the panel in the 98-01 Frontiers, but now, it has been modified. Does anyone have any ideas or know of a site where I can be redirected to? Nowhere I have looked gives me info on the newer models of Frontiers.
Please Help
I have the instruction guide for an aftermarket install kit here. It says: 1. Carefully lift upward on trim around shift lever and remove trim. 2. Remove phillips screws from lower front edge of radio/climate control trim bezel. 3. Remove phillips screws from above radio. 4. Carefully remove radio/climate control trim bezel. 5. Remove phillips screws securing radio to sub-dash. 6. Carefully pull radio forward, disconnect wire harness and antenna lead, and remove radio.
Sounds pretty straight-forward to me. I have a new Kenwood unit to install, and these were the instructions that came with the double-din adapter kit. When it comes to changing recievers, there really isn't much to it. Follow the directions, get yourself a wiring harness kit and some splices, follow the directions, and it's easy money.
The instruction manual states that this is for 02-03 Frontiers and Xterras. I don't know if the 04's are different; I doubt it since the 05 is a total restyle for the Fronty, but you never know. But hey, I'd go with it. Tear it up. Make it yours!