Audio grade crossover parts

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29504
Printed Date: May 14, 2025 at 7:28 AM

Topic: Audio grade crossover parts

Posted By: kfr01
Subject: Audio grade crossover parts
Date Posted: April 01, 2004 at 8:13 PM

I'm thinking of putting together a bandpass crossover for my 'rear fill' 6x9's. (Putting some old equipment to use, I guess.) Anyway,

1) Has anyone tried this? Success?
2) What frequency points should I use? 80-500hz?
3) Where online can I find audio grade crossover parts (coils, caps, etc.)?

Thanks in advance

Replies:

Posted By: DYohn
Date Posted: April 01, 2004 at 8:18 PM

1. Yes, this is relatively easy to do if you know how to build passive crossovers.

2. If all you're trying to do is get some mid-bass fill, then that's fine. If your 6X9's are coaxials or 3-ways, I'd disconnect the tweeter (and mid).

3. www.partsexpress.com has great crossover components, and some good tutorials if you need them. If you want absolute high-end audiophile components, try www.northcreekaudio.com for some of the best in the world.

Have fun, and remember when building passive crossovers it's a good idea to get a few extra components that are close in ratings so in case you need to make a few adjustments, you have the parts available.

Posted By: kfr01
Date Posted: April 01, 2004 at 10:50 PM

Fantastic! Thanks for the advice and links.

KFR