2 s12l7 & 1501d help

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29700
Printed Date: May 13, 2025 at 12:39 PM

Topic: 2 s12l7 & 1501d help

Posted By: dtownhustla
Subject: 2 s12l7 & 1501d help
Date Posted: April 05, 2004 at 12:18 AM

i got 2 2ohm s12l7 and a mtx 1501d amp i want them runnin at 750watts each how do i wire them and can sobody explain to me what rms power12.5 vdc and dynamic power 14.4vdc how can i use the amp at 14.4vdc.

sorry if its a dumb question but im kind of new at this

Specifications

*RMS Power 12.5 VDC*		Input Low Level Input Crossover(s) Low Pass @ 40Hz-200Hz - Variable Compression Circuitry Thunder EQ EBC2 Port RCA Output Low Pass Only
2 Ohm Load	1000 w x 1
4 Ohm Load	500 w x 1
**Dynamic Power 14.4 VDC**
2 Ohm Load	1500 w x 1
4 Ohm Load	750 w x 1

Replies:

Posted By: Clean Install
Date Posted: April 05, 2004 at 12:25 AM

are the subs svc or dvc? if they are dvc wire them like so:

posted_image

-------------
If we learn from each success and
each failure, then we can improve ourselves

Posted By: thapimpfromchi
Date Posted: April 05, 2004 at 2:11 AM

the only thing i can tell you, is forget about gettin the 750 per sub. 14.4 volts, thats fantasy world man. Just look at the 12.5 volt ratings. thats the realistic stuff. I cant offer any other advice until i know if u have dvc or svc. peace.

-------------
1990 Honda Civic HB:
Clarion DXZ545MP H.U.
2- 6.5" Power Acoustik interiors
Diamond Audio 600.1 amp
Diamond Audio 15" M6MKII
Pyramid PB881X 4 CH. Amp

Posted By: dtownhustla
Date Posted: April 05, 2004 at 8:40 AM

their dvc

Posted By: forbidden
Date Posted: April 05, 2004 at 1:26 PM

Wire the subs as was shown above by clean install. Each sub will receive exactly 50% of the rated rms output power of the amp.

-------------
Top Secret, I can tell you but then my wife will kill me.