Speaker Adapters

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30033
Printed Date: July 20, 2025 at 6:45 PM

Topic: Speaker Adapters

Posted By: four door
Subject: Speaker Adapters
Date Posted: April 09, 2004 at 1:30 AM

Doing an amature install and have no idea where to start looking for an item. The cutouts for the speakers are 4.5" and the speakers are 4" which leaves a small gap. I was wondering if a company makes a mounting plate that would add some width to the edge of the speaker frame. Any assistance would be greatly appreciated. Four Door.

-------------
four door

Replies:

Posted By: speedwayaudio1
Date Posted: April 09, 2004 at 1:59 AM

make one your self. use 1/4 plywood. cut out the 4.5 hole drill mounting holes in it. then cut out the 4" hole in the center. drill your speaker mounting holes. easy. If you have a rotozip its real easy. I like the rotozip better than a router. make one out of thin card board first, and use it as a template.

-------------
Big Dave

Posted By: aggie altima
Date Posted: April 09, 2004 at 6:26 AM

not sure what car it is... seeing that you are in Albania. Check www.crutchfield.com, and see if they have your make and model. If they do, they most likely have your adaptor. I got some adaptors from them for my 2000 Nissan Altima 6 3/4" holes which will fit a 6 1/2" speaker.

-------------
Jon
Don't like rockford subs? Then don't look at my car =)

Print Page | Close Window