Alpine Type R +fosgate 1000 bd

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30088
Printed Date: July 17, 2025 at 9:32 PM

Topic: Alpine Type R +fosgate 1000 bd

Posted By: david81
Subject: Alpine Type R +fosgate 1000 bd
Date Posted: April 09, 2004 at 11:18 PM

i've just purchase 3 pairs of Alpine type R 4 ohm 4 coil over with a 1000.1 bd amp 2003 year model .. stats is 1000 rms continue hit for amp ..

ok my question is how can i set 3 of the woofer to 1 ohm or how will i wire it parelle . will my amp be able to handle the 3 woofer at the same time with out hurting it on 1 ohm or should i just set up the woofer as 2ohm ..

please answer someone

Replies:

Posted By: Clean Install
Date Posted: April 09, 2004 at 11:26 PM

well you can only wire the subs to present a 2.67 ohm load or a .67 load,

I would wire them for a 2.67 load...

-------------
If we learn from each success and
each failure, then we can improve ourselves

Posted By: Ketel22
Date Posted: April 10, 2004 at 2:38 AM

yes definately use a 2.67 ohm load, the .67 would probally fry that amp.

-------------
Quad L Handyman services

Posted By: david81
Date Posted: April 10, 2004 at 2:58 AM

will do you guys think that amp will rock those woofer ? or need stronger

Posted By: Ketel22
Date Posted: April 10, 2004 at 3:08 AM

that amp should do decently with those subs, they should be getting just about the rms alpine suggests even tho they can take more. but i think you will be happy with those subs.

-------------
Quad L Handyman services

Posted By: Clean Install
Date Posted: April 10, 2004 at 3:35 AM

you should be fine with that amp....

-------------
If we learn from each success and
each failure, then we can improve ourselves

Print Page | Close Window