enclosure fill

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30141
Printed Date: July 06, 2025 at 4:49 PM

Topic: enclosure fill

Posted By: pimpneon03
Subject: enclosure fill
Date Posted: April 10, 2004 at 11:54 PM

whats a good material to use as a fill for a sub enclosure and where can i get it?

Replies:

Posted By: stevdart
Date Posted: April 11, 2004 at 12:02 AM

Try this, it takes about half as much as regular polyfill (which is found at your local crafts store). This cost more, so it must be better! https://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=260-317

Posted By: Clean Install
Date Posted: April 11, 2004 at 12:03 AM

polyfil

a local shop should have some or you can maybe pick some up at ?walmart? or online at some place like partsexpress

I think its about 10.00 bucks or so...

-------------
If we learn from each success and
each failure, then we can improve ourselves

Posted By: pimpneon03
Date Posted: April 11, 2004 at 12:16 AM

is pillow stuffing a good fill im not sure what material it is but will it work?

Posted By: stevdart
Date Posted: April 11, 2004 at 12:21 AM

The bag will be labelled "polyester fiberfil". Don't use feathers.

Print Page | Close Window