activate aux input, Pioneer P4100?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30313
Printed Date: July 07, 2025 at 4:43 PM

Topic: activate aux input, Pioneer P4100?

Posted By: mgbooth
Subject: activate aux input, Pioneer P4100?
Date Posted: April 13, 2004 at 2:18 PM

Hi, All -

Today I attached an aux. RCA input adapter to the IP Bus (for CD changer) port of my Pioneer DEH-P4100. Whether or not an RCA device is plugged into the female receivers, I can't get the receiver to switch to that mode. I've never had a CD changer or another device attached to this location. Is there something I need to do to activate or power the IP Bus/aux input?

Thanks.

Replies:

Posted By: robbie2883
Date Posted: April 13, 2004 at 3:15 PM

Sure is. You need to turn your key on. then turn the pioneer radio off by holding down the source button. then you need to hold down the function button to enter the option mode and scroll through to the aux input and turn it on.

-------------
if its jammed force it - if it breaks in the process it needed to be fixed anyway
posted_image

Posted By: mgbooth
Date Posted: April 13, 2004 at 3:22 PM

Thanks very much! I just ran out and tried this - worked like a charm. Too bad these things aren't in the user's or instal. manuals.

Cheers,
Mike

Posted By: figi
Date Posted: April 13, 2004 at 4:25 PM

I am pretty much sure that those inforation should be in your manual. I had in 9400 and 5500.

Print Page | Close Window