Print Page | Close Window

wiring help

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30321
Printed Date: July 07, 2025 at 10:25 PM


Topic: wiring help

Posted By: framedragger
Subject: wiring help
Date Posted: April 13, 2004 at 4:06 PM

exactly how do u wire 2 DVC subs to one ohm on a 1 ohm stable amp



Replies:

Posted By: DYohn
Date Posted: April 13, 2004 at 4:13 PM
Are the voice coils 4-ohms each?  The put them all in parallel.  If the voice coils are 2-ohms, you can't do it.

-------------
Support the12volt.com



Posted By: aggie altima
Date Posted: April 13, 2004 at 4:15 PM
if they are 4 ohm DVC, then wire each sub's coils in parallel (+ to +, - to -), then connect one + and - from one speaker to one + and - of the other speaker, then connect + and - from the amp to a + and - set on one of the speakers.

Basically, everything is in parallel, so all +'s are connected to +'s and all -'s are connected to -'s.

-------------
Jon
Don't like rockford subs? Then don't look at my car =)



Posted By: forbidden
Date Posted: April 13, 2004 at 4:57 PM

How's about just like this.

Wiring Option #1
posted_image



-------------
Top Secret, I can tell you but then my wife will kill me.


Print Page | Close Window