Ti10’s in Q-logic boxes

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30406
Printed Date: July 15, 2025 at 7:32 PM

Topic: Ti10’s in Q-logic boxes

Posted By: chevyman26
Subject: Ti10’s in Q-logic boxes
Date Posted: April 15, 2004 at 8:13 AM

I've got 2 Phoenix Gold Ti10's that I want to put into some q-customs boxes for the back doors on my tahoe. The boxes are 3/4" mdf, and the spec sheet with the subs says to use a minimum of 1" mdf. If I use the boxes anyways will it hurt the subs, or will I just go through boxes like mad? Any suggestions on strengthening the boxes without giving up too much air space?

-------------
You'd better get me out of this lord... or else you'll have me to deal with. -- Hunter S. Thompson "F.A.L.I.L.V."

Replies:

Posted By: One_Evil_Necro
Date Posted: April 15, 2004 at 11:49 AM

You should be fine with 3/4

Posted By: kickerstang
Date Posted: April 15, 2004 at 12:07 PM

how much airspace do the boxes have??

-------------
what!?!?! you want some??

Posted By: forbidden
Date Posted: April 15, 2004 at 2:01 PM

In this case you must choose the sub to fit the box, not the box to fit the sub. Reconsider either your choice of subs or choice of box, if you really want those Ti subs, then have the boxes custom built.

-------------
Top Secret, I can tell you but then my wife will kill me.

Print Page | Close Window