two wire bundles in 2000 tacoma?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30476
Printed Date: May 10, 2025 at 3:09 PM

Topic: two wire bundles in 2000 tacoma?

Posted By: benITO
Subject: two wire bundles in 2000 tacoma?
Date Posted: April 16, 2004 at 8:32 AM

I've found two bundles of wires behind an unhooked (burnt) factory stereo in this 2000 tacoma prerunner I'm working on. One set is still attached to the factory harness. The other set is cut clean. I am pretty sure i can find the right one (wire-bundle) to use for the new stereo but what is the other for? Please help...it drives me nuts not knowing and leaving wires hangin'

Replies:

Posted By: othater
Date Posted: April 17, 2004 at 1:11 AM

If it's like my Landcruiser, one set goes to the factory amp and the other some how by-passes the amp directly to the speakers. Both sets should have factory harnesses.

Posted By: auex
Date Posted: April 17, 2004 at 9:17 AM

If you mean 2 plugs then one is for the power and front speakers and one is for the rear speakers. Here is a link to your factory stereo wiring diagram.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Print Page | Close Window