Print Page | Close Window

subs and PS2

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31038
Printed Date: July 06, 2025 at 7:42 PM


Topic: subs and PS2

Posted By: kickerstang
Subject: subs and PS2
Date Posted: April 26, 2004 at 6:50 AM

alright, here's my question. i've got a pair of 10's and they're mounted inverted. right in front of my box i have my PS2, it's right under the magnets of my subs.  will the magnets mess up my PS2? i've seen them mess up tv's and computer screens but i didn't know if it would do anything to my PS2.  need some input on this.

-------------
what!?!?! you want some??



Replies:

Posted By: TacoTaco5
Date Posted: April 26, 2004 at 10:30 AM
i would avise against this setup as the PS2 has onboard memory that coul be erased by these subs.  try putting the ps2 unde one of the seats or on the rear deck behind your back seats (if you have any).  good luck with the install.




Posted By: kickerstang
Date Posted: April 26, 2004 at 11:04 AM
anyone know any type of material i could use to shield the magnet from the PS2

-------------
what!?!?! you want some??




Posted By: kickerstang
Date Posted: April 26, 2004 at 11:04 AM
anyone know any type of material i could use to shield the PS2 from the magnet?

-------------
what!?!?! you want some??




Posted By: defective
Date Posted: April 26, 2004 at 11:07 AM
a chip bag works....  did it to a monitor once.....   they also work at the door sensors at stores... like HMV, then i got a cd burner...posted_image

-------------




Posted By: TacoTaco5
Date Posted: April 26, 2004 at 11:09 AM

see you have 2 problems here, electrical distortion and magnetism.  for the first one just create a box out of metal and ground it.  for the second use a lead based insulation. 






Print Page | Close Window