Hi level input
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31381
Printed Date: May 28, 2024 at 6:57 PM
Topic: Hi level input
Posted By: harvey1959
Subject: Hi level input
Date Posted: May 01, 2004 at 5:43 AM
I just received a Power Acoustik Fire and Ice C12x300 amp from a friend. It doesn't have the hi level input wires and my head unit doesn't have low-level outputs. Where can I get the input wiring from or is there a connector that I can use to attach wires to the amp for input signals. I know I can use a line out converter but I'm trying to be fancy. Also I will be picking up an Alpine HU in the next couple of weeks so I won't need to spend money on an item I will need for a week or so. Any thoughts.
-------------
Harv
Replies:
Posted By: stevdart
Date Posted: May 01, 2004 at 10:05 AM
Either wait for the head unit or use a LOC. There isn't any other way.
-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
Posted By: harvey1959
Date Posted: May 02, 2004 at 1:10 PM
Thanks, I was wondering if there was some sort of pin I could attach to 4 wires and stick them into the hi-level input jack. Sort of like a very small solderless coupler which connects two butt-connectors. Just a thought.
-------------
Harv
|