kenwood kac 648s

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31426
Printed Date: May 13, 2024 at 6:01 PM

Topic: kenwood kac 648s

Posted By: loonytu
Subject: kenwood kac 648s
Date Posted: May 01, 2004 at 11:57 PM

i want to know how to hook up this amp with a second sub amp in the line out of the 648s amp. i do not understand in the manual it shows you a picture of four speakers and a sub using a different amp hooked in the line out

Replies:

Posted By: DYohn
Date Posted: May 02, 2004 at 11:17 AM

That amplifier includes a set of line level (RCA) outputs. These will pass through the signal connected to channels 3 and 4 of the 648 to a second amplifier. Simply connect a stereo RCA patch cable from the output of the 648 to the input of your sub amp.

-------------
Support the12volt.com

Posted By: loonytu
Date Posted: May 02, 2004 at 2:44 PM

can i use any amp for the subs

Posted By: forbidden
Date Posted: May 02, 2004 at 2:53 PM

Any amp you want, except Sony, friends don't let friends buy Sony. The Kenmore amp does not care what is hooked to the pass through rca outputs.

-------------
Top Secret, I can tell you but then my wife will kill me.

Print Page | Close Window