Print Page | Close Window

1993 Jaguar XJ6 Vanden Plas

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31524
Printed Date: May 10, 2024 at 12:56 PM


Topic: 1993 Jaguar XJ6 Vanden Plas

Posted By: rolldogg41
Subject: 1993 Jaguar XJ6 Vanden Plas
Date Posted: May 03, 2004 at 12:55 PM

I need information on how to install a head unit, and amps in this vehicle. This vehicle has a positive ground, what do I need as far as relays, and etc. go? Any help would be greatly appreciated!!!!!




Replies:

Posted By: DYohn
Date Posted: May 03, 2004 at 5:55 PM
To install standard negative ground equipment, you'll have to start with these (or units like them.)

-------------
Support the12volt.com




Posted By: kgerry
Date Posted: May 03, 2004 at 6:08 PM
keep in mind tho most polarity invertors sold are fairly low amperage devices 5-10 amps max....they are not designed to be used in multi-amp applications

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979




Posted By: lspker
Date Posted: May 03, 2004 at 9:38 PM
Are you sure this is a positive ground,  I've worked of 70's and 80's and they were negative, didn't relized that they went back to the old way.




Posted By: DYohn
Date Posted: May 03, 2004 at 9:58 PM

lspker wrote:

Are you sure this is a positive ground,  I've worked of 70's and 80's and they were negative, didn't relized that they went back to the old way.

Yes, that one had me wondering too.  I did some research and it turns out that Jags were built with BOTH positive ground systems and with neg. ground systems through 1995.  1993 was the first year of the Ford/Jaguar joint venture (with Ford buying 30% of Jaguar in 1990) and the cars were built both ways depending on where they were being sold.  Interesting.



-------------
Support the12volt.com




Posted By: rolldogg41
Date Posted: May 07, 2004 at 7:47 PM

thanks guys.  i will see what i can do






Print Page | Close Window