amp ground
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31683
Printed Date: July 12, 2025 at 3:19 PM
Topic: amp ground
Posted By: saleengt
Subject: amp ground
Date Posted: May 06, 2004 at 1:48 AM
how do you guys decide on what the best location for a ground is? and do you just use a self taping screw and a washer? or what do you guys use, thanks.
-saleengt
Replies:
Posted By: Ketel22
Date Posted: May 06, 2004 at 4:12 AM
use your self a nice step up bit in your makita and drill a through hole using washers and a bolt and nut to secure your ground to frame. or you can just stick a self tapping screw threw the body any where in your trunk that is solid metal un-painted with a washer to hold the ring terminal on.... i personally like the first method better.
-------------
Quad L Handyman services
Posted By: doc t
Date Posted: May 06, 2004 at 5:28 AM
Unpainted metal is the operative word here, then screw it down tight just don't strip the threads.
Posted By: kickerstang
Date Posted: May 06, 2004 at 12:24 PM
you probably won't find any unpainted metal so just use a grinder and take the paint off until you get about and inch by inch square then ground through there
-------------
what!?!?! you want some??
|