Wiring For Two Amps, Two Subs, and 1 Cap
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31715
Printed Date: May 15, 2024 at 12:08 AM
Topic: Wiring For Two Amps, Two Subs, and 1 Cap
Posted By: dissnshun
Subject: Wiring For Two Amps, Two Subs, and 1 Cap
Date Posted: May 06, 2004 at 3:03 PM
I currently have 2 infinity perfect 12's hooked up to a jbl bp1200.1 amp. I will be switching subs soon and will need two of the jbl amps. I plan on hooking up these two jbl amps to two audiobahns, but I don't know how to do the wiring for the two amps. How do I get two sets of rca's, ground, power, and signal wires in the back? Also, how can I have the one capacitor hooked up to both of the amps? Someone please help me out because local audio shops here want 150 to do this install which I think is somewhat ridiculous. Thanks.
------------- - 2001 Lexus RX300
- 2 12" Infinity Kappa Perfect 12.1s
- JBL BP1200.1
Replies:
Posted By: kgerry
Date Posted: May 06, 2004 at 3:32 PM
distribution blocks and wire the cap just before the distribution block if you want it to service both amps.....
------------- Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
|