Signal Processors

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31930
Printed Date: May 12, 2024 at 2:22 PM

Topic: Signal Processors

Posted By: mross014
Subject: Signal Processors
Date Posted: May 10, 2004 at 5:00 PM

Does any body have any experience with digital signal processors? If so, what brand and model is recommended. I am willing to spend in the neighborhood of $300.00

-------------
LivnLouder by the paycheck

Replies:

Posted By: DYohn
Date Posted: May 10, 2004 at 5:05 PM

There are LOTS of different types of DSP-based systems out there. What exactly are you hoping to accomplish with one?

-------------
Support the12volt.com

Posted By: mross014
Date Posted: May 10, 2004 at 5:22 PM

I was going to have a graphic equalizer installed that I purchased on line. My installer said if it was his system, he wouldn't put it in. He said I would be better off with a digital signal processor. I want to have more control of the various frequencies. I need to bring down some of the highs and increase the mid ranges.

-------------
LivnLouder by the paycheck

Posted By: DYohn
Date Posted: May 10, 2004 at 5:54 PM

OK, so you're talking about a digital EQ. All the major manufacturers make those. In your price range, check out the Pioneer DEQ-9200 or 7600, Audio Control DQT, or similar units from Clarion, Alpine, etc.

-------------
Support the12volt.com

Print Page | Close Window