mtx 1501 D ohm load

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32045
Printed Date: May 15, 2025 at 8:25 AM

Topic: mtx 1501 D ohm load

Posted By: qwicksilver17
Subject: mtx 1501 D ohm load
Date Posted: May 12, 2004 at 1:49 PM

Hey i got a mtx 1501D and was wondering if it can handle a 1 ohm load?

thanks

Replies:

Posted By: DYohn
Date Posted: May 12, 2004 at 2:11 PM

It's only rated to 2-ohms.

-------------
Support the12volt.com

Posted By: flatulatta
Date Posted: May 12, 2004 at 9:09 PM

ive run a bd501 rated at 2ohms for like 1/2 year no prob just means they cant guarantee that it will run at that load nad not xplod

Posted By: Ravendarat
Date Posted: May 12, 2004 at 11:53 PM

Its only rated for 2 ohms but I have run them at one ohm succesfully, will lots of venting

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Posted By: qwicksilver17
Date Posted: May 13, 2004 at 2:34 AM

cool it wont be for long just untill i can afford to get the other sub. see their dual 2ohm subs so when i have two i'll bridge them down to a 2 ohm load but for not i may leave it at 4 ohms or take a risk at 1.

Print Page | Close Window