Print Page | Close Window

question about wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32046
Printed Date: May 15, 2025 at 2:09 AM


Topic: question about wiring

Posted By: Elderm1
Subject: question about wiring
Date Posted: May 12, 2004 at 2:42 PM

1st post

Im installing a 1F cap and 2 amps and i want to be able to turn off each amp with a switch, question 1 can i just put a switch on the rem or do i put it on the power? ( I think the rem switch will work but im just a noob at this stuff) question 2 do i need a circut breaker on the cap to turn it off when im driving and the amp if off ???



-------------
What would the point be without stuff!



Replies:

Posted By: DYohn
Date Posted: May 12, 2004 at 3:00 PM
No need to switch a cap.  Once they are charged they do not place any load on your system if the amps are off.  Install your amp-on switch in line with the REM lead, not the power.

-------------
Support the12volt.com



Posted By: Elderm1
Date Posted: May 12, 2004 at 3:04 PM

THanks for the info



-------------
What would the point be without stuff!


Print Page | Close Window