KX800.4

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32404
Printed Date: May 15, 2025 at 9:13 PM

Topic: KX800.4

Posted By: mylar
Subject: KX800.4
Date Posted: May 19, 2004 at 4:18 PM

I've been looking into getting 2 kicker CVR 12's which are RMSed at 400 and peak at 800.... the kicker KX800.4 is

100 watts RMS x 4 at 4 ohms

200 watts RMS x 4 at 2 ohms

400 watts RMS x 2 in bridged mode....

What ohm does the amp push in bridge mode, if i wire the 4 channels to push 2 subs??? thanks-

Replies:

Posted By: bryceyaworsky
Date Posted: May 19, 2004 at 6:35 PM

you need a 4 ohm load to bridge.

Posted By: shane7643701
Date Posted: May 23, 2004 at 8:14 AM

I have a kx800.2 and the kicker comp cvr 12's also, I have my subs wired to 2ohm I think and ran a sub to each channel, but mine is a 2 channel amp

-------------
live in your world, come play in mine

Print Page | Close Window