Sorry but im new to this forum i tried lookin for the answer already but couldnt find it im trying to install an amp in 2004 my mazda 3 but i cant figure out were is the remote wire for the amp can someone help me and sorry if this question was already anwered.
If you have an aftermarket deck, you connect the blue (remote wire) to the amp where it says REM + or remote. If stock deck, tap into the ACC power (+12 when acc is turned on) and run the wire to the amp. You use a test light or volt meter to find out the acc.
But I see that you are asking where its at on the amp and I dont see why its hidden, so why dont you say what kind of amp it is. Since this seems to be an issue I wouldnt reccomend you trying to install the amp yourself.
Just follow through with bucktussa's advice.
What headunit is it?
Look for the a blue wire with a label that saids (REM) it should be there. But yeah let us know if you can't find it.!
its a stock hu it looks like
is it better the get done from the pros or is there another way to figure out the remote wire
it might not have a remote wire for the amp. Look for what they said, if not, look for a power antenna wire. that works too.
-------------
1990 Honda Civic HB:
Clarion DXZ545MP H.U.
2- 6.5" Power Acoustik interiors
Diamond Audio 600.1 amp
Diamond Audio 15" M6MKII
Pyramid PB881X 4 CH. Amp
Most likely no remote out on a stock head. You would run the remote turn-on wire from the amp to a 12 volt switched wire under the dash, as bucktussa referred to. That will turn the amp on when the car is on. Have you figured how to get the music signal from the head unit to the amp?
-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
yeah i got a line output conveter Thanks everybody for the help!