My 03 explorer has only the dual media stereo radio, with the low line speakers and no amp or sub. I want to upgrade to the 6-disk in dash cd, and speakers, and need help with the wiring. I have put a 6-disk in for a test, but because I only have the two connecters in the back ( and not the one that goes to the sub amp), I have no bass at all. Does Ford make an upgradable 6-disk in dash that uses my 2 connector wiring harness, and if so, what is the part number. Or, how about some kind of adapter that plugs into the three connecter locations in the back on the 6-disk stereo, that adapts it to my 2 connecter harness.) Or, can I get the connector that runs from the sub connector in the back of the radio, and run seperate wires straight to the speakers. I do want to add amp(s) and a sub, but at a later time. Help me, Please!
Terry
Radios and More is the source you want.
-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
Terry Neisler wrote:
Or, can I get the connector that runs from the sub connector in the back of the radio, and run seperate wires straight to the speakers. I do want to add amp(s) and a sub, but at a later time.
Crutchfield sells such a connector for the Ford Visteon CD6 indash changer. I don't know their part number but give them a call and they'll help you out.
-------------
Support the12volt.com