Print Page | Close Window

Hooking Up an Amplifier

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33149
Printed Date: October 31, 2024 at 6:26 PM


Topic: Hooking Up an Amplifier

Posted By: nickch
Subject: Hooking Up an Amplifier
Date Posted: June 02, 2004 at 7:03 AM

Hi,

theres this 4 channel amp with the ratings:

4 x 100 Watts RMS at 4 Ohms
4 x 200 Watts Max at 4 Ohms
2 x 400 Watts Max at 4 Ohms Bridged
4 x 175 Watts at 2 Ohms .

I was wondering if its possible to hook up 2 channels to an pair of 6x9" each and bridge the other 2 channels for a sub. As it says there, 2x400W while Bridged. I was wondering if i could only have 1 bridged channel and another 2 channels for splits?

Thanks in advance

Nick




Replies:

Posted By: cd2478
Date Posted: June 02, 2004 at 7:41 AM
shouldnt be a problem mate.




Posted By: cd2478
Date Posted: June 02, 2004 at 7:42 AM
ps..unless you have some kind of crossovers on your amp that wont let you choose both LP and HP at the same time.





Print Page | Close Window